This item allows you to pay for a copy of the CAD file from a tone board mapping. 

**  Hi Resolution Duck Jig CAD Files are only available if the initial mapping was done as a high resolution mapping.  If only a Standard Resolution jig CAD file was made, that is all that is available without remapping the tone board.  

If you are requesting a CAD File for a jig we have previously made for you, please specify the serial number of the tone board you are requesting (it is engraved on the jig and starts with the letter "L" and will have 3 or 4 numbers following it - example :  L123) in the comments box at check out.   If your tone board mapping is old enough to not have a serial number then please supply any information engraved on the jig and an approximate date the file/jig was made to help us identify the correct file.  The various engravings on the jigs have changed a few times since we started back in 2003.  If you have more than one tone board on file here and are unsure about which one is the one you want please e-mail us and we will help you identify the tone board you are wanting.

You will receive an e-mail with two files: .DWG and .DXF files from AutoCAD.  The .DWG file will be in AutoCAD version 2004 format and the .DXF file will be in AutoCAD version R12/LT format (this file seems to be the most unilaterally usable file and is why we include it with the.DWG file.)  The CAD File will not be a "complete print" of the entire keg (shape of turned part etc) - it will only be the map of the tone board - the same information we would use for making a custom jig.

Standard Tone board Mapping CAD files are the same files we use for our Standard Custom Jigs and Tone board Milling.  Hi-Res Tone board Mapping CAD files are mapped at a higher resolution (smaller increments along the tone board).  If you are wishing to purchase a CAD file from an already mapped tone board, unless it was originally mapped in Hi-Resolution, only the Standard Resolution file will be available.  If you require a Hi-Res CAD file of an already mapped tone board, you will need to send the original prototype back in for remapping.

If you are requesting only a CAD File and not having a jig made, please specify any additional details you would like included in the CAD file and we will do our best to accommodate those requests.  The details for milling a board are different, and usually some are better off left for your machinist to get directly from your tone board prototype using the method of their preference (such as tone channel depth).