WEBFoot Custom Calls

CNCCUST

CNCCUST

Use this item only if you were sent a direct link to it from us.  Thank you!..

$1,078.73

CNCCUST1

CNCCUST1

Use this item only if you were sent a direct link to it from us.  Thank you!..

$0.00

CNCCUST2

CNCCUST2

Use this item only if you were sent a direct link to it from us.  Thank you!..

$0.00

Flat Jig - FJcut - Cutdown Style

Flat Jig - FJcut - Cutdown Style

Please read the description prior to ordering. We are out of the specific FJCut blanks (FJCut en..

$100.00

Gift Certificate

Gift Certificate

To purchase a Gift Certificate, Click Here! Or you may scroll down to the bottom of the page and c..

$0.00

Tone Board R&D Blanks (5/8" x 4.1")

Tone Board R&D Blanks (5/8" x 4.1")

These blanks are made from Spartech 3/4" Machine Grade Cast Acrylic and are 4.1" OAL, the tenon is ...

$4.25

15/64" (.2343")  Acrylic Drill with 118° point

15/64" (.2343") Acrylic Drill with 118° point

**118° POINT**   15/64" Diameter - Tapered Length Drill bit with WFCC's acrylic grind.&nbs..

$23.50

15/64" (.2343")  Acrylic Drill with 135° point

15/64" (.2343") Acrylic Drill with 135° point

**135° POINT**   15/64" Diameter - Tapered Length Drill bit with WFCC's acrylic grind.&nbs..

$23.50

39/64" (.6093") Acrylic Drill (Red. Shank)

39/64" (.6093") Acrylic Drill (Red. Shank)

Information on using Acrylic Drill Bits - Click Here! We have discontinued this drill..

$40.00

1/4" (.250") Acrylic Drill ** 90° Point **

1/4" (.250") Acrylic Drill ** 90° Point **

1/4" Diameter - Tapered Length Drill bit with WFCC's acrylic grind.  Point is 90° The 90° Poi..

$25.00

1/4" (.250") Acrylic Drill with 118° Point

1/4" (.250") Acrylic Drill with 118° Point

**118° POINT**   1/4" Diameter - Tapered Length Drill bit with WFCC's acrylic grind. ..

$23.50

1/4" (.250") Acrylic Drill with 135° Point

1/4" (.250") Acrylic Drill with 135° Point

**135° POINT**   1/4" Diameter - Tapered Length Drill bit with WFCC's acrylic grind. ..

$23.50

5/8" (.625") Acrylic Drill (1/2" Shank)

5/8" (.625") Acrylic Drill (1/2" Shank)

5/8" Diameter Jobber Bit - shank has been cut down to 1/2" - with WFCC's acrylic grind on the point...

$40.00

9/16" (.5625") Acrylic Drill (Straight Shank)

9/16" (.5625") Acrylic Drill (Straight Shank)

Information on using Acrylic Drill Bits - Click Here! Note:   9/16" is a little small to..

$29.00

3/4" (.750")Acrylic Drill (1/2" Shank)

3/4" (.750")Acrylic Drill (1/2" Shank)

Information on using Acrylic Drill Bits - Click Here!..

$48.00

Showing 1 to 15 of 47 (4 Pages)