• Flat Jig - FJ - .335" deck height

Standard Flat Jig (FJ - .335" deck height) - Hardened and cut on a Wire EDM from quality tool steelIf you are looking for a taller deck height flat jig, we now offer a Flat Jig with a 0.350" deck height - Part #: FJ.35

All of our jigs ae made from high quality tool steel and THROUGH hardened to  ≈61-64Rc to resist files and bandsaw blades.  These jigs CAN NOT be altered with standard tools.  We dont skimp on material or hardening processes, quality is our #1 goal!

Cork Notch Height: .165"  Suggested cork/wedge:  316DCC, 316HDC, 177SW, or use 162SW for double reed applications.  Sand thickness for desired fit.
Suggested Reed: Any Duck Reed
Board Length: Back of cork notch to end of jig:  ≈2.2"
Bore Size: .625 - .626" (for 5/8 tenons)
Deck Height: .335  +/-.005"

This jig has a 5/8 bore(.625"+0.001/-0.000) and is a handy tool for designing your own town board.  Much like a public jig, which acts as a guide to get you to a starting point, the flat jig backs up one step.  The flat jig has only a cork notch and a flat tone board.  This allows you to have repeatable cork notches and soundboard height while trying to design your own tone board. 

You can also use this jig to create the flat tone board you would need for building a curved reed call.  One of the older and more historic ways of making a call was to have a flat tone board and "curl" the reed to create the reed to board clearance for air flow.  This is an excellent way to get that perfectly flat tone board. 

The standard overall length of the jig is ≈2.3" with a ≈2.1" toneboard (from back of cork notch to tip) and the cork notch is .165" tall and the deck height (height from bottom of jig bore to top of soundboard is ≈.335").  There are 2 tapped holes on the bottom of the jig along the bore.  These holes are 1/4"-20tpi and allow you to thread a bolt or set screw through the bottom, and to gently push up on the insert in different spots, to adjust where your base line is - for example if you were making an upslope reed design. 

Another useful feature of the Flat Jig, is one can use it as the starting point for designing goose guts that fit a 5/8" bore.  The tone board is appx .335" tall - so one can cut a wedge and sound board off of the jig and have room to fit them to the bore (ie taper the wedge bottom and angle the sound board top).

Flat jigs come with one steel socket head cap screw, one nylon socket head cap screw (less holding power but does not mar the material as badly)

Remember, do not sand, grind, or use carbide tools on the jig unless you are purposefully trying to alter the shape.  Our Jigs are designed to withstand normal steel cutting tools with a Rockwell hardness of 60Rc or less - less being better for the jig (typical Nicholson files are approximately 55Rc) but the jigs can NOT stand up to carbide, diamond, grinding or abbrasives (like sand paper).   Our jigs are through hardened A2 tool steel and are 61-64Rc hardness.  We suggest avoiding tools made of material that is harder than 60Rc.  Some import files have been found to be harder than the industry standard of 55-58Rc - use at your own risk.  Some HSS or Cobalt tools (such as RotoZip bits etc) can possibly be harder than 60Rc and may prematurely wear on your jig.  We suggest you test any tool you use on the bottom or corner of the jig to be sure its not removing jig material prior to use on the toneboard portion of your jig.

Do not use a hammer on any hardened part or tool as it may fracture and cause injury.

Interested in having your own "Public Jig"?  We offer manufacturing services as well as products.  If you have a design or idea you would like to discuss - feel free to email us.

Write a review

Note: HTML is not translated!
    Bad           Good

Flat Jig - FJ - .335" deck height

  • $85.00


Related Products

D02 - Duck Gut

D02 - Duck Gut

These double reed duck guts fit a .500" bore (WCO500 gutserts fit these guts).  The reeds are p..

$2.15

D01 - Duck Gut

D01 - Duck Gut

NEW LOWER PRICE!   These double reed duck guts fit a .500" bore (these guts fit WCO500 gut..

$3.00

ARK01 - Single Reed Duck Keg

ARK01 - Single Reed Duck Keg

Color shade may vary slightly from the picture from batch to batch. This is a molded one piece Ark..

$7.25

WCDR1 Duck Reed - Series #1 0.010" Thick (15 Pack)

WCDR1 Duck Reed - Series #1 0.010" Thick (15 Pack)

WEBFoot's Series #1 Duck Reed - 0.010" Thick (15 Pack) 0.010" Thickness - 1.5" long and .575" wide..

$13.50

WCDR1 Duck Reed - Series #1 - 0.010" Thick (100 pack)

WCDR1 Duck Reed - Series #1 - 0.010" Thick (100 pack)

WEBFoot's Series #1 Duck Reed - 0.010" Thick (100 Pack) 0.010" Thickness - 1.5" long and .575" wid..

$75.00

PJ1 - Public Duck Call Jig (Parallel)

PJ1 - Public Duck Call Jig (Parallel)

This is the "original" and most popular WEBFoot public jig...  the one that started the term "p..

$110.00

Custom Duck Jig

Custom Duck Jig

PLEASE READ THIS ENTIRE PAGE:  There are questions below that we require answers to in order to..

$0.00

3/16" Cork Wedges Die Cut (10 pack)

3/16" Cork Wedges Die Cut (10 pack)

(10 pack)  3/16" thick, .375" long and .700" wide die cut cork for AR Style duck calls This c..

$3.00

ARK02 - Single Reed Duck Keg

ARK02 - Single Reed Duck Keg

Color shade varies from the picture from batch to batch.  These kegs are polished. This is a ..

$7.00

ARK03 - Single Reed Duck Keg

ARK03 - Single Reed Duck Keg

Color shade may vary slightly from the picture from batch to batch. This is a molded one piece Tim..

$5.75

WCDR2 Duck Reed - 0.010" - Series #2 (15 Pack)

WCDR2 Duck Reed - 0.010" - Series #2 (15 Pack)

WEBFoot's Series #2 Duck Reed (15 Pack) 0.010" Thickness - 1.75" long and .510" wide with 45° dog ..

$13.50

WCDR2 Duck Reed - 0.010" -  Series #2 (100 pack)

WCDR2 Duck Reed - 0.010" - Series #2 (100 pack)

WEBFoot's Series #2 Duck Reed (100 Pack) 0.010" Thickness - 1.75" long and .510" wide with 45° dog..

$75.00

3/16" Cork Wedges Die Cut (100 pack)

3/16" Cork Wedges Die Cut (100 pack)

(100 bulk pack)  3/16" thick, .375" long and .700" wide die cut cork for AR Style duck calls ..

$27.00

177SW-10    Sanoprene Wedges .177" thick (10 pack)

177SW-10 Sanoprene Wedges .177" thick (10 pack)

(10 pack)  .177" height, .355" long for AR Style duck calls - Thickness is for single reed use ..

$4.50

SDR1-15 Duck Reed - Plain (15 Pack)

SDR1-15 Duck Reed - Plain (15 Pack)

Plain Duck Reed (15 Pack) - Rectangle - No dog ears 0.010" Thickness - 1.655" long and .520" wid..

$7.50

SDR1-100  Duck Reed - Plain (100 Pack)

SDR1-100 Duck Reed - Plain (100 Pack)

Plain Duck Reed (100 Pack) - Rectangle - No dog ears 0.010" Thickness - 1.655" long and .520" wide..

$35.00

162SW-10    Sanoprene Wedges .162" Thick (10 pack)

162SW-10 Sanoprene Wedges .162" Thick (10 pack)

(10 pack)  .162" heigh, .355" long for AR Style duck calls - Thickness is for double reed use w..

$4.50

162SW-100    Sanoprene Wedges .162" Thick (100 pack)

162SW-100 Sanoprene Wedges .162" Thick (100 pack)

(100 pack)  .162" height, .355" long for AR Style duck calls - Thickness is for double reed use..

$38.00

177SW-100    Sanoprene Wedges .177" thick (100 pack)

177SW-100 Sanoprene Wedges .177" thick (100 pack)

(100 pack)  .177" height, .355" long for AR Style duck calls - Thickness is for single reed use..

$38.00

PJ2 - Public Duck Call Jig (Upslope)

PJ2 - Public Duck Call Jig (Upslope)

All of our jigs are made from tool steel and hardened to 61-64Rc or greater (prior to cutting the so..

$110.00

WCDR3 Duck Reed - Series #3 - 0.010" Thick (100 pack)

WCDR3 Duck Reed - Series #3 - 0.010" Thick (100 pack)

WEBFoot's Series #3 Duck Reed - 0.010" Thick (100 Pack) 0.010" Thickness - 1.75" long and .51..

$75.00

WCDR3 Duck Reed - Series #3 - 0.010" Thick (15 Pack)

WCDR3 Duck Reed - Series #3 - 0.010" Thick (15 Pack)

WEBFoot's Series #3 Duck Reed - 0.010" Thick (15 Pack) 0.010" Thickness - 1.75" long and .510" w..

$13.50

3/16" High Density Cork Strip (.330-.365" x .1875" x 9")

3/16" High Density Cork Strip (.330-.365" x .1875" x 9")

3/16" thick, width can vary from .330-.365" wide and 9" long - high density cork for duck calls. T..

$5.25

WCDR4 Duck Reed - Series #2 - 0.014" Thick (100 pack)

WCDR4 Duck Reed - Series #2 - 0.014" Thick (100 pack)

This is the same reeds a WEBFoot's Series #2 Duck Reed - but it is 0.014" thick  For use as the..

$75.00

WCDR4 Duck Reed - Series #2 - 0.014" Thick (15 pack)

WCDR4 Duck Reed - Series #2 - 0.014" Thick (15 pack)

This is the same reeds a WEBFoot's Series #2 Duck Reed - but it is 0.014" thick  For use as the..

$13.50

WCDR5 Duck Reed - Series #3 .014" (100 pack)

WCDR5 Duck Reed - Series #3 .014" (100 pack)

Picture Coming soon!   WEBFoot's Series #3 Duck Reed in 0.014" thick  (100 Pack) 0.0..

$75.00

WCDR5 Duck Reed - Series #3 - .014" (15 Pack)

WCDR5 Duck Reed - Series #3 - .014" (15 Pack)

WEBFoot's Series #3 Duck Reed (15 Pack) in 0.014" thickness 0.014" Thickness - 1.75" long and .510..

$13.50

WCDR6 Duck Reed - Series #1 - 0.014" Thick (100 pack)

WCDR6 Duck Reed - Series #1 - 0.014" Thick (100 pack)

WEBFoot's Series #1 Duck Reed - 0.014" Thick (100 Pack) 0.014" Thickness - 1.5" long and .575" wid..

$75.00

WCDR6 Duck Reed - Series #1 - 0.014" Thick (15 Pack)

WCDR6 Duck Reed - Series #1 - 0.014" Thick (15 Pack)

WEBFoot's Series #6 Duck Reed - 0.014" Thick (15 Pack) 0.014" Thickness - 1.5" long and .575" wide..

$13.50

ARK04 - Injection Molded AR Style Duck Keg

ARK04 - Injection Molded AR Style Duck Keg

AR Style Double Reed Duck Call Insert - Injection Molded - BLACK Can be assembled as single or d..

$5.75

Duplicate Custom Duck Jig

Duplicate Custom Duck Jig

PLEASE READ THIS ENTIRE PAGE: We will need the serial number (Lxxxx) and date code from the back..

$235.00

Tags: FJ