Navigation
Acrylic Polishing
Acrylic Polishing: OD surfaces ONLY - Production polishing quality
Polishing is ONLY available for the outter surface of the part. We will NOT polish the ID of any parts. It is a semi automated process and ID polishing is not possible at this point in time.
It is strongly suggested that if you are to have us polish the OD of your parts, that you have us do the machining to help increase the quality of the polishing process.
Pricing is usually $4.00-$5.00 per part - Barrel or Keg - irrelevant of color or transparency of the cast acrylic. Again, this is only polishing the OD surface.
Minimum Quantity per Work Order: 50 parts (you can mix and match kegs and barrels)
Batch sizes smaller than 50 parts may be charged out at double rate or more depending on the batch size.
This is production quality polishing - it is not "gone over with a fine tooth comb - everything is flawless" type polishing. Its a process that yeilds decent results. If you would like a reference for the polishing results, email us for a reference. If you want show quality polishing - this is not what you want, and is not something we offer.
If we do not machine the parts you send to be polished, they must have a surface finish that is equal to being wet sanded down to 600 grit sand paper. The better the sanding job the better the polishing will turn out.